WEG SSW900 – Soft Starters

SSW900 (3).jpg
 

SSW900 are SOFT starters that accelerate, decelerate and protect three-phase induction motors in power ratings from 10A to 1400A @ 220Vac – 575Vac.

The SSW900 is the right choice for a complete motor protection and start/stop control, A very easy GUI makes it possible to setup in under 60 seconds! see link below. The well-structured menu interface allows adjustments and configurations with online parameter help right on the HMI, in addition to event logs with date and time and setup assistant. The SSW900 also has built-in bypass, which contributes to extending the lifetime of the soft starter, optimizing space and reducing heat dissipation inside electric panels

The SSW-900 Series Soft-Starter are static starters intended to accelerate, decelerate and protection of three phase induction motors. The control of the voltage applied to the motor by the means of the thyristors triggering angle variation, allows the soft-start to start and stop smoothly an electric motor.

With adequate adjustments of the variables, the torque produced is adjusted to the needs of the load, so the required current is going to be as low as possible for the starting procedure.

WEG Soft-Starter SSW-900 series, micro processed and full digital, are products with state-of-the-art technology and have been produced to ensure the best starting and stopping performance of induction motors, presenting themselves as a complete and low cost solution.

Features

  • Ratings: 10A to 1400A @ 220Vac – 575Vac (+10% / -15%)

  • 1/90-250Vac auxiliary control voltage.

  • Built-in rated (AC1) bypass contactors for all models.

  • Conformal coated circuit boards.

  • Detachable Graphic HMI with USB port, with built-in Bluetooth and copy function.

  • Oriented start-up and online help.

  • Real time clock with event log.

  • 2 independent slots to connect plug-in modules

  • Voltage ramp, Current Limit, Pump Control, Torque control, Current Ramp start modes.

  • Inputs and outputs with programmable functions (5 DIs, 3 ROs, 1 AO & 1 Motor PTC Input as standard)

  • Communication Options: RS-485 (Modbus RTU), CANopen, DeviceNet, Profibus DP, Ethernet/IP, Modbus TCP/IP, Profinet IO.

  • SoftPLC Built in. J Integral motor thermal protection.

You can browse further information by downloading the WEG Catalog on the link below.

To find out more about our range of soft Starters and how we can better service your needs, Get in touch.